.png){kind=small}
.png){kind=small}
Description
Aron Alpha, Type 200, is a one component, room temperature curing structural adhesive composed mainly of alpha cyanoacrylate monomer in a liquid state. When this monomer is applied in a single thin coating to the bonding surface of the material, it instantly solidifies through polymerization to produce an extra high strength, colorless bond with virtually no shrinkage. Aron Alpha bonds almost any nonporous material except fluorocarbons. Solvents such as gasoline, propane, oil, alcohol or benzene do not affect resinified Aron Alpha. The adhesive itself contains no solvents. The Aron Alpha bond has a high tensile strength but a relatively lower shear strength. Aron Alpha is not a gap filler. Good surface contact is essential. Meets MIL-A-46050 C. Ideal for the bonding of tissues to a tissue-slicer, tissue block or to a blank block etc. Physical Properties of Type 200 Before use (Liquid state)
| Refractive Index, N20°C/D | .1.4363 |
| Viscosity @ 25°C (Brookfield) | 2 |
| Specific Gravity, 20°C/4°C | 1.050 |
| Boiling Point, 5mmHg, °F | 140-144 |
| Melting Point (°F) | -130 |
| Flash Point (°F) | 181 |
| Solubility | acetone, MEK, benzene, toluene, ethylacetate, nitromethane |
After use (Bonded state)
| Solubility Paramete | 10.72 |
| Softening Temp. (Viscat State), (°F) | 293 |
| Melting Point (°F) | 392-406 |
| Specific Gravity, 20°C / 4°C | 1.2483 |
| Refractive Index, N20°C/D | 1.4870 |
| Electric Resistance | 10 11-13 |
| Solubility | acetone, nitromethane |
Temperature RT msds_72588
Reviews
There are no reviews yet.