.png){kind=small}
.png){kind=small}
Showing 1–150 of 481 results
-
Supplies for grids (57)
-
Antistatic grid storage box for 100 TEM GRIDS
Well-designed Economy antistatic TEM grid box with a capacity of 100 the standard 3.05mm TEM grids. Ideal for long term storage. Body with the 100 storage cavities is made of blue ABS with a clear acrylic sliding lid. Positions are referenced with numbers and letters, clearly printed on the body. The sliding lid has also 5 positions printed on the inside to enable easy location. Wider spacing of the cavities prevent confusion when loading and make retrieval easier. Dimensions of the EM-Tec TGB-100 TEM grid box are: 92 x 55 x 7mm. See our video o our channel YouTube “Microscopy Direct”
Ref: 2797AS
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
All Glass Nebulizer
An all glass unit for the simple production of microdroplets. An object is held vertically in front of the nebulizer outlet and by squeezing the atomizer a fine spray is created. The nebulizer set comes with an All Glass Nebulizer bulb and Atomizer.
Ref: D70505
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
12 Cavities Spot Plate, Polypropylene
Very similar to the white porcelain plate, this PP plate comprises 12 cavities of approximately 1 ml capacity and is economically priced. This plate is very high quality, unbreakable as well as autoclavable.
Ref: D71572
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
3-Cavities Spot Plates, LDPE
These spot plates have three depressions 21 mm diameter x 7 mm deep. The tray is 28 mm x 85 mm. Made from low density polyethylene and will withstand temperatures up to 80°C. The shipping weight is 0.6 lb per case of 40.
Ref: D71574
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
3-Well Porcelain Slide – Micro Spot Plate
Porcelain Micro Spot Plate is ideal for microchemical applications.
With three concave depressions. Cavities measure ⅞” O.D. x ¼” Deep (22 x 7 mm). Plate overall measures 3⅜” (L) x1 ⅜” (W) (85 x 34 mm)
Ref: D71561
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Alpha Numeric Index Grid ( Cu, Ni, Au…)
By employing a rectangular mesh the support value of the grid has been increased, offering a value intermediate between the most commonly used grid (200 Lines/”) and (300 Lines/”/). Each grid rectangle is asymmetrical having different outlines in all four corners. This allows for the orientation of the grid to be determined at microscopic levels. The index feature enables the position of each grid to be identified with reference to the letters A-O along the horizontal axis and the numbers 1-15 along the vertical axis. The logo in the rim allows for precise orientation and aids in the identification of each side. Grids are available in Copper, Copper/Palladium, Nickel, and Gold.
Ref: DG200F4
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Asbestos Analysis Index Grid ( Cu, Ni)
Ref: DG200EMSIND
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
BEEM® Dial-A-Grid and Block Storage Modules
The same as Dial-A-Grid Module but with two additional cavities for block storage.
*BEEM® Is A Registered Trademark of Better Equipment For Electron Microscopy, Inc.
Ref: D71149
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Beryllium Support Films
Beryllium Support Film, 25 x 25 mm each
Ref: D76030
-
C-flat™ Holey Carbon Grids for TEM , CF-2/4-4C, Copper only
Ref: DCF442
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
C-flat™ Holey Carbon Grids for TEM , CF-1.2/1.3-2Au , Gold only
Product Code CF-1.2/1.3-2AU
Ref: DCF213-100-Au
-
C-flat™ Holey Carbon Grids for TEM , CF-1.2/1.3-3Au, Gold only
Product Code CF-1.2/1.3-3AU
Ref: DCF313-100-Au
-
C-flat™ Holey Carbon Grids for TEM , CF-1.2/1.3-4Au , Gold only
Product Code CF-1.2/1.3-4AU
Ref: DCF413-100-Au
-
C-flat™ Holey Carbon Grids for TEM , CF-1/1-2Au , Gold only
Product Code CF-1/1-2AU
Ref: DCF21-100-Au
-
C-flat™ Holey Carbon Grids for TEM , CF-2/1-2Au , Gold only
Product Code CF-2/1-2AU
Ref: DCF212-100-Au
-
C-flat™ Holey Carbon Grids for TEM , CF-2/1-3Au, Gold only
Product Code CF-2/1-3AU
Ref: DCF312-100-Au
-
C-flat™ Holey Carbon Grids for TEM , CF-2/1-4Au , Gold only
Product Code CF-2/1-4AU
Ref: DCF412-100-Au
-
C-flat™ Holey Carbon Grids for TEM , CF-2/2-2Au , Gold only
Product Code CF-2/2-2AU
Ref: DCF222C-100-Au
-
C-flat™ Holey Carbon Grids for TEM , CF-2/2-3Au, Gold only
Product Code CF-2/2-3AU
Ref: DCF223C-100-Au
-
C-flat™ Holey Carbon Grids for TEM , CF-2/2-4Au , Gold only
Product Code CF-2/2-4AU
Ref: DCF224C-100-Au
-
C-flat™ Holey Carbon Grids for TEM , CF-2/4-2Au , Gold only
Product Code CF-2/4-2AU
Ref: DCF242-100-Au
-
C-flat™ Holey Carbon Grids for TEM , CF-2/4-3Au, Gold only
Product Code CF-2/4-3AU
Ref: DCF342-100-Au
-
C-flat™ Holey Carbon Grids for TEM , CF-2/4-4Au , Gold only
Product Code CF-2/4-4AU
Ref: DCF442-100-Au
-
C-flat™ Holey Carbon Grids for TEM , CF-4/1-4Au , Gold only
Product Code CF-4/1-4AU
Ref: DCF441-100-Au
-
C-flat™ Holey Carbon Grids for TEM , CF-4/2-2Au , Gold only
Product Code CF-4/2-2AU
Ref: DCF422-100-Au
-
C-flat™ Holey Carbon Grids for TEM , CF-4/2-3Au, Gold only
Product Code CF-4/2-3AU
Ref: DCF423-100-Au
-
C-flat™ Holey Carbon Grids for TEM , CF-4/2-4Au , Gold only
Product Code CF-4/2-4AU
Ref: DCF424-100-Au
-
C-flat™ Holey Carbon Grids for TEM , CF-MH-2Au , Gold only
Product Code CF-MH-2AU
Ref: DCF2MH-100-Au
-
C-flat™ Holey Carbon Grids for TEM , CF-MH-3Au , Gold only
Product Code CF-MH-3AU
Ref: DCF3MH-100-Au
-
C-flat™ Holey Carbon Grids for TEM , CF-MH-4Au , Gold only
Product Code CF-MH-4AU
Ref: DCF4MH-100-Au
-
C-flat™ Holey Carbon Grids for TEM – CF-2/0.5-2C – Copper only
Ref: DCF205
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
C-flat™ Holey Carbon Grids for TEM – CF-2/0.5-4C – Copper only
Ref: DCF405
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
C-flat™ Holey Carbon Grids for TEM – CF-2/1-2C – Copper only
Ref: DCF212
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
C-flat™ Holey Carbon Grids for TEM – CF-2/1-3C – Copper only
Ref: DCF312
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
C-flat™ Holey Carbon Grids for TEM – CF-2/1-4C – Copper only
Ref: DCF412
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
C-flat™ Holey Carbon Grids for TEM – CF-2/2-2C – Copper only
Ref: DCF-222C
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
C-flat™ Holey Carbon Grids for TEM – CF-2/2-3C – Copper only
Ref: DCF-223C
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
C-flat™ Holey Carbon Grids for TEM – CF-2/2-4C – Copper only
Ref: DCF-224C
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
C-flat™ Holey Carbon Grids for TEM – CF-2/4-2C – Copper only
Ref: DCF242
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
C-flat™ Holey Carbon Grids for TEM – CF-2/4-3C – Copper only
Ref: DCF342
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
C-flat™ Holey Carbon Grids for TEM – CF-4/1-2C – Copper only
Ref: DCF241
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
C-flat™ Holey Carbon Grids for TEM – CF-4/1-4C – Copper only
Ref: DCF441
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
C-flat™ Holey Carbon Grids for TEM – CF-4/2-2C – Copper only
Ref: DCF422
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
C-flat™ Holey Carbon Grids for TEM – CF-4/2-3C – Copper only
Ref: DCF423
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
C-flat™ Holey Carbon Grids for TEM – CF-4/2-4C – Copper only
Ref: DCF424
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
C-flat™ Holey Carbon Grids for TEM – CF-MH-2C – Copper only
Ref: DCF2MH
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
C-flat™ Holey Carbon Grids for TEM – CF-MH-3C – Copper only
Ref: DCF3MH
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
C-flat™ Holey Carbon Grids for TEM – CF-MH-4C – Copper only
Ref: DCF4MH
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
C-flat™ Holey Carbon Grids for TEM – CF-1.2/1.3-2C – Copper only
Ref: DCF213
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
C-flat™ Holey Carbon Grids for TEM – CF-1.2/1.3-3C – Copper only
Ref: DCF313
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
C-flat™ Holey Carbon Grids for TEM – CF-1.2/1.3-4C – Copper only
Ref: DCF413
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
C-flat™ Holey Carbon Grids for TEM – CF-1/1-2C – Copper only
Ref: DCF21-50
-
C-flat™ Holey Carbon Grids for TEM – CF-1/1-3C – Copper only
Ref: DCF31
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
C-flat™ Holey Carbon Grids for TEM – CF-1/1-4C – Copper only
Ref: DCF41
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
C-flat™ Holey Thick Carbon Grids for TEM , CF-2/1-2C-T, Copper only
Ref: DCFT212
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
C-flat™ Holey Thick Carbon Grids for TEM , CF-2/1-3C-T , Copper only
Ref: DCFT312
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
C-flat™ Holey Thick Carbon Grids for TEM , CF-2/2-2C-T , Copper only
Ref: DCFT-222C
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
C-flat™ Holey Thick Carbon Grids for TEM , CF-2/2-3C-T , Copper only
Ref: DCFT-223C
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
C-flat™ Holey Thick Carbon Grids for TEM , CF-2/4-3C-T , Copper only
Ref: DCFT342
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
C-flat™ Holey Thick Carbon Grids for TEM , CF-2/4-4C-T , Copper only
Ref: DCFT442
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
C-flat™ Holey Thick Carbon Grids for TEM , CF-4/1-2C-T , Copper only
Ref: DCFT241-100
-
C-flat™ Holey Thick Carbon Grids for TEM , CF-4/2-2C-T , Copper only
Ref: DCFT422
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
C-flat™ Holey Thick Carbon Grids for TEM , CF-4/2-3C-T , Copper only
Ref: DCFT423
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
C-flat™ Holey Thick Carbon Grids for TEM , CF-MH-2C-T , Copper only
Ref: DCFT2MH
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
C-flat™ Holey Thick Carbon Grids for TEM , CF-1.2/1.3-2C-T , Copper only
Ref: DCFT213
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
C-flat™ Holey Thick Carbon Grids for TEM , CF-1/1-2C-T , Copper only
Ref: DCFT21-100
-
C-flat™ Holey Thick Carbon Grids for TEM , CF-1/1-3C-T , Copper only
Ref: DCFT31-100
-
C-flat™ Holey Thick Carbon Grids for TEM , CF-1/1-4C-T , Copper only
Ref: DCFT41-100
-
C-flat™ Holey Thick Carbon Grids for TEM , CF-2/1-4C-T , Copper only
Ref: DCFT412
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
C-flat™ Holey Thick Carbon Grids for TEM , CF-2/2-4C-T , Copper only
Ref: DCFT-224C
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
C-flat™ Holey Thick Carbon Grids for TEM , CF-2/4-2C-T , Copper only
Ref: DCFT242
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
C-flat™ Holey Thick Carbon Grids for TEM , CF-4/2-4C-T , Copper only
Ref: DCFT424
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
C-flat™ Holey Thick Carbon Grids for TEM , CF-MH-3C-T, Copper only
Ref: DCFT3MH
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
C-flat™ Holey Thick Carbon Grids for TEM , CF-MH-4C-T, Copper only
Ref: DCFT4MH
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
C-flat™ Holey Thick Carbon Grids for TEM – CF-1.2/1.3-4C – Copper only
Ref: DCFT413
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Carbon Gilder Finder Grids New Thickness Ranges
A thin film of pure carbon deposited on one side of the grid. The thickness range is as follows: Standard: Approx. 5-6nm Ultra-Thin (UL): 3-4nm Thick (TH): 10nm Extra Thick (ET): 20-30nm Quantity : 50/box
Ref: CF200F1-UL
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Carbon Gilder Finder Grids Standard Thickness
A thin film of pure carbon deposited on one side of the grid. The thickness range is as follows: Standard: Approx. 5-6nm Ultra-Thin (UL): 3-4nm Thick (TH): 10nm Extra Thick (ET): 20-30nm
Ref: CF200F1
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Carbon Hexagonal Mesh New Thickness Ranges
A thin film of pure carbon deposited on one side of the grid. The thickness range is as follows: Standard: Approx. 5-6nm Ultra-Thin (UL): 3-4nm Thick (TH): 10nm Extra Thick (ET): 20-30nm Quantity : 50/box
Ref: CF100H-UL
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Carbon Hexagonal Mesh Standard Thickness
A thin film of pure carbon deposited on one side of the grid. The thickness range is as follows: Standard: Approx. 5-6nm Ultra-Thin (UL): 3-4nm Thick (TH): 10nm Extra Thick (ET): 20-30nm
Ref: CF100H
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Carbon London Finder Grids New Thickness Ranges
A thin film of pure carbon deposited on one side of the grid. The thickness range is as follows:
Standard: Approx. 5-6nm
Ultra-Thin (UL): 3-4nm
Thick (TH): 10nm
Extra Thick (ET): 20-30nmQuantity : 50/box
Ref: CFLF135-UL
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Carbon London Finder Grids Standard Thickness
A thin film of pure carbon deposited on one side of the grid. The thickness range is as follows:
Standard: Approx. 5-6nm
Ultra-Thin (UL): 3-4nm
Thick (TH): 10nm
Extra Thick (ET): 20-30nmRef: CFLF135
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Carbon Single Hole New Thickness Ranges (COPPER)
A thin film of pure carbon deposited on one side of the grid. The thickness range is as follows: Standard: Approx. 5-6nm Ultra-Thin (UL): 3-4nm Thick (TH): 10nm Extra Thick (ET): 20-30nm Quantity : 50/box
Ref: CFGA75-UL
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Carbon Single Hole New Thickness Ranges (NICKEL)
A thin film of pure carbon deposited on one side of the grid. The thickness range is as follows: Standard: Approx. 5-6nm Ultra-Thin (UL): 3-4nm Thick (TH): 10nm Extra Thick (ET): 20-30nm Quantity : 50/box
Ref: CFGA75-Ni
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Carbon Single Hole Standard Thickness
A thin film of pure carbon deposited on one side of the grid. The thickness range is as follows: Standard: Approx. 5-6nm Ultra-Thin (UL): 3-4nm Thick (TH): 10nm Extra Thick (ET): 20-30nm
Ref: CFGA75
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Carbon Slots New Thickness Ranges
A thin film of pure carbon deposited on one side of the grid. The thickness range is as follows:
Standard: Approx. 5-6nm
Ultra-Thin (UL): 3-4nm
Thick (TH): 10nm
Extra Thick (ET): 20-30nmQuantity : 50/box
Ref: CF205-UL
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Carbon Slots Standard Thickness
A thin film of pure carbon deposited on one side of the grid. The thickness range is as follows: Standard: Approx. 5-6nm Ultra-Thin (UL): 3-4nm Thick (TH): 10nm Extra Thick (ET): 20-30nm
Ref: CF205
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Carbon Square Mesh New Thickness Ranges
A thin film of pure carbon deposited on one side of the grid. The thickness range is as follows:
Standard: Approx. 5-6nm
Ultra-Thin (UL): 3-4nm
Thick (TH): 10nm
Extra Thick (ET): 20-30nmQuantity : 50/box
Ref: CF150-UL
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Carbon Square Mesh Standard Thickness
A thin film of pure carbon deposited on one side of the grid. The thickness range is as follows:
Standard: Approx. 5-6nm
Ultra-Thin (UL): 3-4nm
Thick (TH): 10nm
Extra Thick (ET): 20-30nmRef: CF150
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Carbon Thin Bar Hexagonal Mesh New Thickness Ranges
A thin film of pure carbon deposited on one side of the grid. The thickness range is as follows:
Standard: Approx. 5-6nm
Ultra-Thin (UL): 3-4nm
Thick (TH): 10nm
Extra Thick (ET): 20-30nmQuantity : 50/box
Ref: CFTH200-UL
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Carbon Thin Bar Hexagonal Mesh Standard Thickness
A thin film of pure carbon deposited on one side of the grid. The thickness range is as follows:
Standard: Approx. 5-6nm
Ultra-Thin (UL): 3-4nm
Thick (TH): 10nm
Extra Thick (ET): 20-30nmRef: CFTH200
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Carbon Thin Bar Square Mesh New Thickness Ranges
A thin film of pure carbon deposited on one side of the grid. The thickness range is as follows:
Standard: Approx. 5-6nm
Ultra-Thin (UL): 3-4nm
Thick (TH): 10nm
Extra Thick (ET): 20-30nmQuantity : 50/box
Ref: CFT200-UL
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Casting Film Device
An all glass apparatus. It casts uniformly thin films of parlodion, formvar, or butvar directly onto 1×3 microscope slides. The film casting solution can be used repeatedly. A built-in fine-pressure-release valve helps control the speed of drainage. The thickness of the film is controlled by the concentration of the film solution and the rate of the drainage. The unit requires 100 mls of film casting solution to start. The unit comes complete with: – 500 ml capacity flask with built-in valves; Air-in and Air-out – Film casting Cylinder with Cover – 75 cc Atomizer Technical Data Sheets
Ref: D71305
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Collodion (Parlodion), 2% in Amyl Acetate
making film support grids
d
Ref: D126-6
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Cryo Pucks storage grids
Ref: D71168
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Dial-A-Grid Storage Modules
A two tone color coded plastic box with insert which has 24 letter-labeled crossed slots, where the grids can be stored. A rotating protection plate covers the slots and allows for exposure of one grid at a time.
Measures: 2⅓” (L) x 1¾” (W) x ½” (H) (57 x 45 x 12.5 mm).*BEEM® Is A Registered Trademark of Better Equipment For Electron Microscopy, Inc.
Ref: D71148
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Dial-Grid-N-Block-Storage
24 slots labeled with letters from A-X where the grids can be stored and rotated for easy access as well as 3 additional cavities for block storage. Available with and without a unique identification number.
Ref: D71158
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Domino Rack
The Domino rack is “U” shaped and made from an aircraft alloy sheet stock with serial perforations; thermally bonded spaceage copolymer; 5 mm diameter holes, 28 holes per rack. The formvar film cast on the rack will stretch across a series of smooth edged holes forming a flat, wrinkle free film that is ready for grid mounting.
Ref: D7062
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
EMS25 TEM Grid Storage Box
Ref: D7116-1
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
ESD Vacuum Tool
Battery-free, hand-held vacuum pick up pen designed for the safe pick-up of SMD components during assembly, test and rework processes. With fountain-pen dimensions, Vampire grabs, lifts and places components in complete safety, aided by a powerful internal piston and a full ESD protection. A complete choice of tips designed for any size of SMD component helps the operator to have always the right tool in hand. Includes: pen, conductive metal straight needle, 45° angled metal needle, conductive rubber cup 4mm, conductive rubbercup 6mm, conductive rubber cup 9 mm, and lubricant kit.
Ref: D71927
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
ExP Vacuum Wand Kit
ExP Vacuum Wand Kits are a lower cost alternative to the Porta-Wand and Porta-Vac II systems, which share the same tips. Has a push-button to close the vacuum and release the wafer. The included stand keeps the button pressed when the wand is not in use. Comes complete with an ⅛” Inner Diameter coiled vacuum hose and a wafer tip. Must use a vacuum pump or vacuum line. Able to be used with our Vacuum Pick Up System.
Ref: D71932-00
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Five-Slide Gripper
6/pk
Ref: D71410-06
-
Formvar 15/ 95 Resin, Powder
CAS #63450-15-7 Polyvinyl formvar desiccated. Used to prepare Support films. Soluble in ethylene dichloride, chloroform or dioxane. MSDS Storage : RT Unit : 100g
Ref: D15800
-
Formvar Gilder Finder Grids NEW Thickness Ranges
Quantity : 50/box
Ref: FF200F1-00-1
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar Gilder Finder Grids Standard Thickness
Support Film on Grids
Support Film on grids has become a main product line for us since the demand for high quality coated grids has increased. To make your microscopy work easier and to save you a great deal of time we offer you a complete line. All of our coated grids are optically checked followed by batch testing in the EM. Packed in grid storage box. All the grids below (except for the Beryllium Support Films) are also available with the following options:
– Molybdenum grids in place of Au, Cu, or Ni
– As Silicone free
– With ultra-thin thickness (thickness can be requested)
– Extra thick thicknessNOTE: All of our film is laid on the shiny side of the grid.
Ref: FF200F1-00
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar Gilder Finder Grids, Hexagonal Mesh Standard Thickness
Support Film on Grids
Support Film on grids has become a main product line for us since the demand for high quality coated grids has increased. To make your microscopy work easier and to save you a great deal of time we offer you a complete line. All of our coated grids are optically checked followed by batch testing in the EM. Packed in grid storage box. All the grids below (except for the Beryllium Support Films) are also available with the following options:
– Molybdenum grids in place of Au, Cu, or Ni
– As Silicone free
– With ultra-thin thickness (thickness can be requested)
– Extra thick thicknessNOTE: All of our film is laid on the shiny side of the grid.
How do Nickel and Copper Grids React with Periodic Acid?
Periodic Acid + Ni
Ni-Periodate + H2
Periodic Acid + Cu
Cu-Periodate + H2
In this case you should use Gold Grids.
Ref: FF100H
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar Hexagonal Mesh NEW Thickness ranges
Support Film on Grids
Support Film on grids has become a main product line for us since the demand for high quality coated grids has increased. To make your microscopy work easier and to save you a great deal of time we offer you a complete line. All of our coated grids are optically checked followed by batch testing in the EM. Packed in grid storage box. All the grids below (except for the Beryllium Support Films) are also available with the following options:
– Molybdenum grids in place of Au, Cu, or Ni
– As Silicone free
– With ultra-thin thickness (thickness can be requested)
– Extra thick thicknessNOTE: All of our film is laid on the shiny side of the grid.
How do Nickel and Copper Grids React with Periodic Acid?
Periodic Acid + Ni
Ni-Periodate + H2
Periodic Acid + Cu
Cu-Periodate + H2
In this case you should use Gold Grids.
Ref: FF100H-UL
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar London Finder Grids NEW Thickness ranges
Support Film on Grids
Support Film on grids has become a main product line for us since the demand for high quality coated grids has increased. To make your microscopy work easier and to save you a great deal of time we offer you a complete line. All of our coated grids are optically checked followed by batch testing in the EM. Packed in grid storage box. All the grids below (except for the Beryllium Support Films) are also available with the following options:
– Molybdenum grids in place of Au, Cu, or Ni
– As Silicone free
– With ultra-thin thickness (thickness can be requested)
– Extra thick thicknessNOTE: All of our film is laid on the shiny side of the grid.
How do Nickel and Copper Grids React with Periodic Acid?
Periodic Acid + Ni
Ni-Periodate + H2
Periodic Acid + Cu
Cu-Periodate + H2
In this case you should use Gold Grids.
Ref: FFLF135-UL
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar London Finder Grids Standard Thickness
Support Film on Grids
Support Film on grids has become a main product line for us since the demand for high quality coated grids has increased. To make your microscopy work easier and to save you a great deal of time we offer you a complete line. All of our coated grids are optically checked followed by batch testing in the EM. Packed in grid storage box. All the grids below (except for the Beryllium Support Films) are also available with the following options:
– Molybdenum grids in place of Au, Cu, or Ni
– As Silicone free
– With ultra-thin thickness (thickness can be requested)
– Extra thick thicknessNOTE: All of our film is laid on the shiny side of the grid.
How do Nickel and Copper Grids React with Periodic Acid?
Periodic Acid + Ni
Ni-Periodate + H2
Periodic Acid + Cu
Cu-Periodate + H2
In this case you should use Gold Grids.
Ref: FFLF135
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar Single Hole NEW Thickness ranges ( Nickel)
A thin film of pure formvar resin. The thickness range is as follows:
Standard: Approx. 10nm
Ultra-Thin (UL): 5-6nm
Thick (TH): 15-20nm
Extra Thick (ET): 25-50nmQuantity : 50/box
Ref: FFGA75-Ni
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar Slots NEW Thickness ranges
A thin film of pure formvar resin. The thickness range is as follows:
Standard: Approx. 10nm
Ultra-Thin (UL): 5-6nm
Thick (TH): 15-20nm
Extra Thick (ET): 25-50nmRef: FF205-UL
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar Slots Standard Thickness
A thin film of pure formvar resin. The thickness range is as follows:
Standard: Approx. 10nm
Ultra-Thin (UL): 5-6nm
Thick (TH): 15-20nm
Extra Thick (ET): 25-50nmRef: FF205
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar Solution in Ethylene Dichloride
Microfiltered-ready to use.4 x 25 ml
MSDS_15810 MSDS_15820 MSDS_15830 MSDS_15830-25 Ref: D1581
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar Square Mesh NEW Thickness Ranges
A thin film of pure formvar resin. The thickness range is as follows:
Standard: Approx. 10nm
Ultra-Thin (UL): 5-6nm
Thick (TH): 15-20nm
Extra Thick (ET): 25-50nmQuantity 50/box
Ref: FF100-00-1
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar Square Mesh Standard Thickness
A thin film of pure formvar resin. The thickness range is as follows:
Standard: Approx. 10nm
Ultra-Thin (UL): 5-6nm
Thick (TH): 15-20nm
Extra Thick (ET): 25-50nmRef: FF100-00
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar Thin Bar Hexagonal Mesh NEW Thickness ranges
Support Film on Grids
Support Film on grids has become a main product line for us since the demand for high quality coated grids has increased. To make your microscopy work easier and to save you a great deal of time we offer you a complete line. All of our coated grids are optically checked followed by batch testing in the EM. Packed in grid storage box. All the grids below (except for the Beryllium Support Films) are also available with the following options:
– Molybdenum grids in place of Au, Cu, or Ni
– As Silicone free
– With ultra-thin thickness (thickness can be requested)
– Extra thick thicknessNOTE: All of our film is laid on the shiny side of the grid.
Ref: FFTH200-UUL
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar Thin Bar Hexagonal Mesh NEW Thickness ranges
A thin film of pure formvar resin. The thickness range is as follows:
Standard: Approx. 10nm
Ultra-Thin (UL): 5-6nm
Thick (TH): 15-20nm
Extra Thick (ET): 25-50nmRef: FFTH200-UL
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar Thin Bar Hexagonal Mesh Standard Thickness
A thin film of pure formvar resin. The thickness range is as follows:
Standard: Approx. 10nm
Ultra-Thin (UL): 5-6nm
Thick (TH): 15-20nm
Extra Thick (ET): 25-50nmRef: FFTH200
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar Thin Bar Square Mesh NEW Thickness ranges
Support Film on Grids
Support Film on grids has become a main product line for us since the demand for high quality coated grids has increased. To make your microscopy work easier and to save you a great deal of time we offer you a complete line. All of our coated grids are optically checked followed by batch testing in the EM. Packed in grid storage box. All the grids below (except for the Beryllium Support Films) are also available with the following options:
– Molybdenum grids in place of Au, Cu, or Ni
– As Silicone free
– With ultra-thin thickness (thickness can be requested)
– Extra thick thicknessNOTE: All of our film is laid on the shiny side of the grid.
How do Nickel and Copper Grids React with Periodic Acid?
Periodic Acid + Ni
Ni-Periodate + H2
Periodic Acid + Cu
Cu-Periodate + H2
In this case you should use Gold Grids.
Ref: FFT200-UL
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar Thin Bar Square Mesh Standard Thickness
A thin film of pure formvar resin. The thickness range is as follows:
Standard: Approx. 10nm
Ultra-Thin (UL): 5-6nm
Thick (TH): 15-20nm
Extra Thick (ET): 25-50nmRef: FFT200
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar/Carbon Gilder Finder Grids New Thickness Ranges
Quantity : 50/box
Ref: FCF200F1-Cu
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar/Carbon Gilder Finder Grids Standard Thickness
Thickness : standard ‘A’
Ref: FCF200F1
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar/Carbon Hexagonal Mesh New Thickness Ranges (COPPER)
Quantity : 50/box
Ref: FCF100H-Cu
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar/Carbon Hexagonal Mesh New Thickness Ranges (GOLD)
Quantity : 50/box
Ref: FCF100H-Au
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar/Carbon Hexagonal Mesh New Thickness Ranges (NICKEL)
Quantity : 50/box
Ref: FCF100H-Ni
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar/Carbon Hexagonal Mesh Standard Thickness
Thickness : standard ‘A’
Ref: FCF100H
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar/Carbon London Finder Grids New Thickness Ranges (COPPER)
Quantity : 50/box
Ref: FCFLF135-Cu
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar/Carbon London Finder Grids New Thickness Ranges (GOLD)
Quantity : 50/box
Ref: FCFLF135-Au
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar/Carbon London Finder Grids New Thickness Ranges (NICKEL)
Quantity : 50/box
Ref: FCFLF135-Ni
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar/Carbon London Finder Grids Standard Thickness
Thickness : standard ‘A’
Ref: FCFLF135
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar/Carbon Single Hole New Thickness Ranges 100 micron
Quantity 50/box
Ref: FCFGA100-SB
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar/Carbon Single Hole New Thickness Ranges 1000 micron
Quantity 50/box
Ref: FCFGA1000-SB
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar/Carbon Single Hole New Thickness Ranges 150 micron
Quantity 50/box
Ref: FCFGA150-SB
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar/Carbon Single Hole New Thickness Ranges 1500 micron
Quantity 50/box
Ref: FCFGA1500-SB
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar/Carbon Single Hole New Thickness Ranges 200 micron
Quantity 50/box
Ref: FCFGA200-SB
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar/Carbon Single Hole New Thickness Ranges 300 micron
Quantity 50/box
Ref: FCFGA300-SB
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar/Carbon Single Hole New Thickness Ranges 400 micron
Quantity 50/box
Ref: FCFGA400-SB
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar/Carbon Single Hole New Thickness Ranges 600 micron
Quantity 50/box
Ref: FCFGA600-SB
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar/Carbon Single Hole New Thickness Ranges 75 micron
Quantity 50/box
Ref: FCFGA75-SB
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar/Carbon Single Hole New Thickness Ranges 800 micron
Quantity 50/box
Ref: FCFGA800-SB
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar/Carbon Slots New Thickness Ranges
Quantity 50/box
Ref: FCF205-Cu
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar/Carbon Slots Standard Thickness
Thickness : standard A
Ref: FCF205
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar/Carbon Square Mesh New Thickness Ranges (COPPER)
Quantity : 50/box
Ref: FCF100-Cu
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar/Carbon Square Mesh New Thickness Ranges (GOLD)
Quantity : 50/box
Ref: FCF100-Au
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar/Carbon Square Mesh New Thickness Ranges (NICKEL)
Quantity : 50/box
Ref: FCF100-Ni
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar/Carbon Square Mesh Standard Thickness
Thickness : standard ‘A’
Ref: FCF100
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar/Carbon Thin Bar Hexagonal Mesh New Thickness Ranges ( COPPER)
Quantity : 50/box
Ref: FCFTH200-Cu
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar/Carbon Thin Bar Hexagonal Mesh New Thickness Ranges ( GOLD)
Quantity : 50/box
Ref: FCFTH200-Au
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar/Carbon Thin Bar Hexagonal Mesh New Thickness Ranges ( NICKEL)
Quantity : 50/box
Ref: FCFTH200-Ni
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar/Carbon Thin Bar Hexagonal Mesh Standard Thickness
Thickness : standard ‘A’
Ref: FCFTH200
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page -
Formvar/Carbon Thin Bar Square Mesh New Thickness Ranges (COPPER)
Quantity : 50/box
Ref: FCFT200-Cu
Read MoreSelect options This product has multiple variants. The options may be chosen on the product page
 |
Very similar to the white porcelain plate, this PP plate comprises 12 cavities of approximately… Show more (+) Very similar to the white porcelain plate, this PP plate comprises 12 cavities of approximately 1 ml capacity and is economically priced. This plate is very high quality, unbreakable as well as autoclavable. Show less (-) |
 |
These spot plates have three depressions 21 mm diameter x 7 mm deep. The tray… Show more (+) These spot plates have three depressions 21 mm diameter x 7 mm deep. The tray is 28 mm x 85 mm. Made from low density polyethylene and will withstand temperatures up to 80°C. The shipping weight is 0.6 lb per case of 40. Show less (-) |
 |
Porcelain Micro Spot Plate is ideal for microchemical applications.With three concave depressions. Cavities measure… Show more (+) Porcelain Micro Spot Plate is ideal for microchemical applications.With three concave depressions. Cavities measure ⅞" O.D. x ¼" Deep (22 x 7 mm). Plate overall measures 3⅜" (L) x1 ⅜" (W) (85 x 34 mm) Show less (-) |
 |
An all glass unit for the simple production of microdroplets. An object is held vertically… Show more (+) An all glass unit for the simple production of microdroplets. An object is held vertically in front of the nebulizer outlet and by squeezing the atomizer a fine spray is created. The nebulizer set comes with an All Glass Nebulizer bulb and Atomizer.Technical Data Sheets Show less (-) |
 |
By employing a rectangular mesh the support value of the grid has been increased, offering… Show more (+) By employing a rectangular mesh the support value of the grid has been increased, offering a value intermediate between the most commonly used grid (200 Lines/") and (300 Lines/"/). Each grid rectangle is asymmetrical having different outlines in all four corners. This allows for the orientation of the grid to be determined at microscopic levels. The index feature enables the position of each grid to be identified with reference to the letters A-O along the horizontal axis and the numbers 1-15 along the vertical axis. The logo in the rim allows for precise orientation and aids in the identification of each side. Grids are available in Copper, Copper/Palladium, Nickel, and Gold. Show less (-) |
 |
Well-designed Economy antistatic TEM grid box with a capacity of 100 the standard 3.05mm… Show more (+) Well-designed Economy antistatic TEM grid box with a capacity of 100 the standard 3.05mm TEM grids. Ideal for long term storage. Body with the 100 storage cavities is made of blue ABS with a clear acrylic sliding lid. Positions are referenced with numbers and letters, clearly printed on the body. The sliding lid has also 5 positions printed on the inside to enable easy location. Wider spacing of the cavities prevent confusion when loading and make retrieval easier. Dimensions of the EM-Tec TGB-100 TEM grid box are: 92 x 55 x 7mm. See our video o our channel YouTube "Microscopy Direct" Show less (-) |
 |
Asbestos Analysis Index Grids Our unique index grids for all of your microscopy work. These… Show more (+) Asbestos Analysis Index Grids Our unique index grids for all of your microscopy work. These grids are manufactured in the strictest accordance to meet AHERA requirements. The grids are available in either copper or nickel and there are 100 grids/vial. Specifications: Mesh 200 Line/” Pitch 125 microns Bar Width 10 microns +/- 2 microns Hole […] Show less (-) |
 |
The same as Dial-A-Grid Module but with two additional cavities for block storage.
*BEEM® Is… Show more (+) The same as Dial-A-Grid Module but with two additional cavities for block storage.
*BEEM® Is A Registered Trademark of Better Equipment For Electron Microscopy, Inc. Show less (-) |
 |
Beryllium Support Film, 25 x 25 mm each |
 |
C-flat™ is the premier holey carbon grid for cryo-transmission electron microscopy. Overview C-flat™ is an… Show more (+) C-flat™ is the premier holey carbon grid for cryo-transmission electron microscopy. Overview C-flat™ is an ultra-flat, holey carbon-coated TEM support grid for transmission electron microscopy (TEM). Unlike competing holey carbon films, C-flat™ is manufactured without plastics, so it is clean upon arrival and the user has no residue to contend with. Product code Cat# Hole […] Show less (-) |
